First Lemmy post for me!

I was going to post on /Linuxquestions but I thought I would try here first.

I have an imac2011 which I ran Ubuntu 23.04, Kubuntu and Ubuntu Cinnamon. I discovered Easy Effects audio app which allowed me to download profiles to enhance the audio from the system.

I recently decided to try OpenCoreLegacyParcher and installed a newer version of macos, which is currently running on my system and the audio quaility is just breath taking compared to Linux.

Is there anyway I can get closer to audio from macos on Linux? I’m considering going back to Linux soon but I think i’ll miss how good the audio is :(

  • Raimu@lemmy.ml
    82·
    11 months ago

    By default audio is often configured to run properly on the crappiest sound card and CPU. Since you used easyeffect I assume you use pipeWire. Here some of my config : In pipewire.conf :

    default.clock.rate          = 96000
 default.clock.allowed-rates = [ 44100 48000 96000 192000 ]

    In pipewire-pulse.conf

    stream.properties = {
    resample.quality      = 10
}
    • Atemu@lemmy.ml
      10·
      11 months ago

      Unless you happen to be a bat, setting the output sample rate to 96000 will do absolutely nothing to improve audio quality.

      • Raimu@lemmy.ml
        3·
        11 months ago

        As @holland@lemmy.ml said I shouldn’t have set default.clock.rate.

        I have 96000 and 192000 in allowed-rates beacause some of my flac are at this sample rate and it avoid resampling them and losing quality (or using CPU in this case because at resample.quality 10 it should not be hearable)

    • holland@lemmy.ml
      3·
      11 months ago

      If you’re using default.clock.allowed-rates you shouldn’t set default.clock.rate or it won’t switch based on the source frequency.