I don’t have any other servers that i could run the whole time so it should just be based on one single device,
I did it with Lemmy Easy Deploy
Here are some revised configs I put together as the docs were insufficient if it helps https://git.minnix.dev/minnix/lemmy_configs
Thank you, amazing work!
Thank you so much the ones from the docs just confused me even more. Does NGinx work on the same device or is that just useless
It’s necessary with the way I have it setup
I had a hard time with this and I could not get lemmy easy deploy to work. I was finally able to install on a Pi 4 with ansible using ubergeek77’s images. It was difficult because of the lack of documentation.
I got it to work properly, would like to message from that isntance but this post isn’t federated
Since your question is quite basic and general, I’ll try to answer equally.
-
Hardware: For a single user instance a Pi 3B+ is sufficient. Still, Lemmy can take up some storage space over time because of the images. So make sure you don’t take the smallest SD card you have lying around. I assume you know how install an OS and get basic things running.
-
Get a domain; there are many providers out there. Consider using a TLD of your country (e.g.
.de,.fr). Domains are usually relatively cheap. You’re most likely running your Pi at home, so check if you have a static IP address or if you have a dynamic one. First one? Great, go ahead. Second one: Check if your domain provider offers an API to automatically update the DNS record; example provider api. -
Have a look at the Lemmy administration docs. Depending on your experience, it is relatively easy to setup. Make sure you understand what you’re doing, i.e. first get to know Docker for example, then follow the commands. If you don’t understand something, just ask or search online. Lemmy is not very complex to operate, so for every part of the deployment you should be able to find information online.
-
Set up port forwarding in your router for ports 80 (HTTP) and 443 (HTTPS). You can find information for your specific router online, but for some routers this cannot be done.
-
Get a SSL certificate for your domain. You can get one for free with Let’s Encrypt.
-
Once you have your instance up and running, I would recommend setting it to “private” first. This way you can play around with your instance or reinstall if something goes wrong without having to worry about federation. Once you’ve federated (communicated with other instances, e.g. by subscribing to communities of other instances), you really shouldn’t reinstall!
I hope this helps you with the first steps. Decide for yourself if you want to deal with maintenance and administration “long term”. It’s perfectly fine to use other instances and not host Lemmy yourself if you don’t feel up to it. After all, there is also a security aspect to consider. If you do: have fun with self-hosting!
-
