I’m thinking of getting the Bambu Labs P1S, anything that I should be aware of? Anybody got one? Thoughts?

  • ketcham1009@lemmy.ml
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    If the printer is fully enclosed (door and lid closed) and the print is long enough. The heat from the hotend and bed can build up in the chamber, causing heat creep. The chamber temperature is not monitored. Since the nozzle and heatbreak are one piece, removing the clog is a bit more involved.

    I’ve had to do it 3 times since I bought the printer on release. All were 12+ hour PLA prints and done after high temperature filament prints (nylon and abs).

    The issue is entirely preventable, just me forgetting to open the door on long prints lol.

    • rasterweb@kbin.social
      link
      fedilink
      arrow-up
      2
      ·
      edit-2
      1 year ago

      I mostly print PLA so the lid is propped open and the door is ajar… Once winter comes to the midwest and my basement is freezing cold I may have to adjust things a bit. I added a Prusa MINI in January 2022 and could not print properly until I added an enclosure.