So, I had some issues with installing the GPU in the case, and the GPU bottom (those metals things at the bottom) ended up scratching part of the motherboard. From what I can tell, there’s a bunch of similar components all the way up, so I’d think there’s redundancy, so I guess it’s not that important. Here is a picture:
https://i.postimg.cc/7LBwkr3h/62e626.jpg
https://files.catbox.moe/62e626.jpg
PC boots fine into bios, fans work, stuff are recognized, mouse and keyboard also works, but I haven’t really done much beyond that.
Motherboard is: MSI B650 Gaming Plus Wifi
It’s located here, and on them, it is written K72 then vertically smaller K2 (the 2 has an underline):
https://i.postimg.cc/XJNcnppT/modelblock-gaming-pd.png
https://files.catbox.moe/7otcn6.png
Should I get a new motherboard?
Edit: Better quality image, and new image host added.
I can tell you that they wouldn’t have included it if it didn’t serve a purpose. However, that purpose might be for a feature you don’t use, or possibly even one that doesn’t exist for your board (e.g. if there’s a similar model with features added/removed, they may simply leave components off the lesser SKUs. For instance, you sometimes see solder points for 4 RAM slots, when only 2 are installed)
While I’m a fan of using things until they truly break, you have to consider what this could mean. If they are for voltage regulation, you could end up with rich, chunky volts to your CPU, RAM, GPU, etc.
If they are for thermal cutoff, things could melt or even catch fire. It might even happen when you aren’t home.
And if they are for RGB controls, you could end up with no lights, and that would just be too boring to accept. (/s)
words to live by. you know how much less your car would be if it only used 8 bolts on the exhaust headers instead of 10? for millions of that model alone? bet your ass they’re doing the bare minimum to get it off the assembly line.