It’s totally fine if you have a good seasoning on there. The soap thing is largely a myth. I wash mine with soap every time I use it and it’s still slick as ever

Thank you for sharing the link. Here’s the relevant bit from the article:

Most gas stations don’t want to install new tanks just for E15. Instead, they’re installing blender pumps, which mix the ethanol and gasoline together in the right proportion depending on which one you want. But there’s a problem: if you pump E15 into your car, about a third of a gallon remains in the fueling hose when you’re done. If someone comes along, switches to E10, and buys a single gallon for their lawnmower, they’ll get a third of a gallon of E15 and two-thirds of a gallon of E10. That comes to about 11.7% ethanol, and that might be enough to set your lawnmower on fire.

So the EPA produced a new rule: if you sell E15, you have to require your customers to buy at least four gallons of gas regardless of what blend they’re buying. That’s a big enough purchase that the residual fuel in the hose is too small to matter

I definitely thought those were carrots. That certainly changes things

How is it punishing customers? The rest of the article suggests it may improve things

“It speeds up the process at entry and speeds up the process at the checkout,” he said. “That’s what we believe and we’re going to pilot it.”

All space heaters operate at the same efficiency since they convert electricity to heat via resistance. You may have a small one and low electricity rates in your area to see a negligible change. Or maybe other uses went down and masked the increase from the space heater usage.

Insurance and property taxes are factored into the monthly payment, though it’s not obvious from the meme

Thanks for sharing! These are indeed hard to get right and it’s nice that you put your “failure” online. Thankfully the consolation prize for croissants that aren’t laminated properly is delicious bread rolls, which I can say from experience.

Really exciting development for the climate change mitigation toolkit. Let’s hope it’s not too challenging or costly to scale up and deploy.

The recovery time, aka first hour rating, should be in the specs for the models to find one that suits your needs. There’s more detailed research on them available as well if you’re so inclined.

You can, but not as a heat pump so you wouldn’t get all the efficiency gains and it will very often end up being more expensive to run than gas tankless in the near term.

I agree lawns are dumb but from an environmental perspective they can be net carbon sinks, which I found surprising. Though they are still bad for other environmental reasons.

Geo heat pump install is indeed very high. But air source heat pumps (both heat pump water heaters and heat pumps for heating/cooling) don’t have that issue and have similar performance, except in extreme climates where geo outperforms.

Yeah, those are all good points and certainly factor in. There are objective studies about human comfort preferences used for building design. I expect OPs question is a roundabout way to ultimately ask about comfort preferences.

I do 80F during the day and 78F at night in the pacific northwest US. It usually gets cold enough at night that opening windows will cool my house to the low 70s overnight. In the winter I have it set to 68F. I use ceiling fans and appropriate clothing to stay comfortable within those parameters.

I can see why you would think that happens, but it either doesn’t happen, or it does and the shit water gets washed away by the continuous spray of clean water just like taking a shower.

I actually don’t mind it, especially in the summer. You can get heated ones that cost more. Maybe my anus isn’t that temperature sensitive?

How does getting in the shower save time over the 10 seconds it takes to spray your bhole?

A bidet. You can install it yourself in 20 minutes and enjoy a lifetime of cleaner buttholes and save on tp.

It’s time for this unfortunate headline to go away. I see a variation of this posted in nearly every thread about climate and emissions, a complex topic that the average person understandably doesn’t know much about beyond some headline that stuck with them. Snopes has a good article debunking The Guardian’s grossly misleading headline.

To see the actual sources of GHG emissions, at least in the US, the EPA has good resources. In short, agriculture is 10% (methane from cows fits here), transportation is 28%, electric power generation is 25% (fossil fuel power plants generating electricity), residential and commercial buildings are 13% (in practice, the building sector overall is about a third of emissions after attributing the emissions from the electric power slice. Residential and commercial buildings use 75% of the power generated in the US), and finally industry is 23% (again, a bit more factoring in their share of the electric power emissions. Industry uses about a quarter of all power in the US).

As you can see, emissions, or at least GHG emissions, are spread across the economy. Some industries are heavy polluters (e.g. cement manufacturing), but that’s ultimately to make products for the market, even if they do have plenty of room to improve efficiency and reduce emissions, as do all other areas of the economy, especially buildings.

I can’t wait to switch mine to induction as well. I always run the fume hood with gas but it still feels like it’s not capturing most of the fumes