This video is perfectly applicable, the rot that sets in in a large company when you have no competition to counteract it is exactly what has happened here.

Not sure a short summary will cut it.

They had no competition for a long period and ended up with an accountant CEO that caused their R&D to stagnate massively. They had a ton of struggling and failing to deliver all in most areas, and they wombled about releasing CPU generations with ~4% performance uplifts, probably saving a few bucks in the process.

AMD turned back up again with Ryzen and Epyc models that were pretty good and and an impressive pace of improvement ( like ~14% generational uplifts ) that caused them such a fright that they figured out they had to ditch the accountant.

Pat Gelsinger was asked to step up as CEO and fix that mess. They axed some obvious defective folks in their structure and rushed about to release 12th generation products with decent gains by cranking the power levels of the CPUs to absurd levels, this was risky and it kind of looks like they are being bit with it now.

Server CPU sales are way down because they are just plain uncompetitive. They have missed out on the chunk of money they could have got from the AI bubble because they never had a good GPU architecture they could leverage over to use. They have been shutting down unprofitable and troublesome divisions like the Optane storage and NUC divisions to try and save money, but they are in a bad way.

The class actions mentioned elsewhere in the thread are probably coming because the rush to make incremental improvements to 13th generation and 14th generation CPU’s resulted in issues with power levels and other problems that seem to be causing those CPU’s to crash and sometimes fail altogether.

Most hubs didn’t protect you from anything in particular.

Most of them would forward everything to every port, some really insane ones would strip out the spanning tree that could have prevented a loop.

It’s been a long time since I did anything that goes as far into a network as the desktop, but 15+ years ago we had a customer ring up with the same sort of complaint. After we followed the breadcrumbs on site we found a little 8 port hub ( that we hadn’t supplied ) plugged into two wall ports that went to two different Cisco edge switches in the server room, two cisco phones also with their passthrough ports both patched into same switch and then two desktop PC’s.

Amazing.

I replaced mythtv with tvheadend on the backend and kodi on the frontend like 5 or 6 years ago.

The setup and configuration at the time on mythtv was slanted towards old ( obsolete ) analog tuners and static setup and tvheadend was like a breath of fresh air in comparison where you could point it at a DVB mux or two and it would mostly do what you want without having to fight it.

I’m not sure how much longer I’ll want something that can tune DVB-S2 and DVB-T though. Jellyfin and friends handle everything other than legacy TV better than kodi these days.

I don’t have a good answer for you.

DHCPv6 is pretty well the only good way to have a prefix delegated by your ISP and have it chopped up and deployed in an automated fashion through multiple layers of an edge network. I’m also a real fan of the audit trail in the logs that results from a stateful transaction.

Some background info if you haven’t run into it though is described by this google issue tracker id: https://issuetracker.google.com/issues/36949085. The summary is that one guy at google is obstructing DHCPv6 being implemented on android.

I’ve built out a bunch of IPv6 networks that implement DHCPv6 on the edge. I personally use a whole lot of android devices and none of them get IPv6 addresses, pretty well everything else does. I’m mostly cool with it at this point, eventually the guy who is obstructing IPv6 at google will move on.

The most impressed I’ve been with hardware encoding and decoding is with the built in graphics on my little NUC.

I’m using a NUC10i5FNH which was only barely able to transcode one vaguely decent bitrate stream in software. It looked like passing the hardware transcoding through to a VM was too messy for me so I decided to reinstall linux straight on the hardware.

The hardware encoding and decoding performance was absolutely amazing. I must have opened up about 20 jellyfin windows that were transcoding before I gave up trying and called it good enough. I only really need about 4 maximum.

The graphics on the 10th generation NUC’s is the same sort of thing that is on the 9th gen and 10th gen desktop cpu’s, so if you have and intel cpu with onboard graphics give it a try.

It’s way less trouble than the last time I built a similar setup with NVidia. I haven’t tried a Radeon card yet, but the jellyfin docs are a bit more negative about AMD.

Haha, 144p @ 60hz is fricking hilarious.

Reminds me of seeing completely rubbish resolution real player videos embedded in websites back in the late 90s and me thinking, “Well that isn’t ever going to take off”.

The situation is mostly reversed on Linux. Nvidia has fewer features, more bugs and stuff that plain won’t work at all. Even onboard intel graphics is going to be less buggy than a pretty expensive Nvidia card.

I mention that because language model work is pretty niche and so is Linux ( maybe similar sized niches? ).

Please drink a verification can to continue.

The samsung TV that I bought for my son had this annoying overlay thing that pops up when you turn it on that shows all the different inputs and nags about various things it thinks are wrong with the world. It is plugged into an Nvidia shield that we do most things on, but you can’t use the shield until the overlay calms the fuck down and disappears.

It’d be great if you could just have the thing turn on and display an input like our older TVs do.

I swear allegiance to the only one true storage vendor, Micropolis. The Micropolis 1323A being the embodiment of perfection in storage basked in the glow of the only holy storage interconnect, MFM.

I wait patiently for the return of Micropolis so that I may serve as their humble servant.

Oh not seriously, just making fun of the LTT vote which resulted in Linus using one for a bit.

A fairphone actually sounds pretty cool.

What you need is an LG Wing: https://en.wikipedia.org/wiki/LG_Wing

Your bridge isn’t bridging properly. If Router B is sending a destination unreachable then the packets are being handled on it further up the stack at layer 3 by some sort of routing component rather than by a layer 2 bridging one.

Steam can do pretty well filling a tail circuit, probably better on average. But a torrent of a large file with a ton of peers when your client has the port forward back into the client absolutely puts more pressure on a tail circuit. More flows makes the shaping work harder.

Sometimes we see an outlier in our reporting and it’s not obvious if a customer has a torrent or a DDoS directed at them for the first few minutes.

No, if two 300 megabit tails are shaped correctly, a third user shouldn’t notice that the 1G backhaul has got a bunch of use going on.

If you do, there’s something wrong or you aren’t really getting the 1G for some reason. Not generally a concern in a carrier platform.

I build ISP and private data networks for a living.

A contention ratio for residential circuits of 3 to 1 isn’t bad at all. You’d have to get pretty unlucky with your neighbors being raging pirates to be able to tell that was contended at all. Any data cap should scare the worst of the pirates away, so you probably won’t be in that situation.

If you can feel the circuit getting worse at different times of the day then the effective contention ( taking into account further upstream ) is probably more like 30 to 1 than 3 to 1.

Often on Linux group membership changes only take effect on login. So you could try logging out of your session and logging back in after your group changes to test that theory out.

I got banned from Reddit while I was on a work trip to the USA. Hadn’t posted in over a year at the time. I’m absolutely mystified as to why.

They refer you to the content policy but they won’t tell you which post might violate it. I asked a few times what it was that caused the ban, but they either just referred to the content policy or once they said “Repeated violations”. I actually requested my user data so I could stick up my complete post history publicly and see if anyone else could figure it out. My username was / is sirdeadbeef on reddit.

I haven’t put any work into displaying them nicely, this is the format you get them in if you request your data:

https://db.osoal.org.nz/reddit/

The context of this post is Linux on AMD cards, is there any support at all for raytracing or upscaling of any sort on Linux on either AMD or Nvidia? Serious question.