I’ve not fetched subtitles in a while but back when I did, I recall all the websites hosting them were extremely protectionist… more so than any other category of content on the web.
Of course the fix is to have torrents for the subtitle collections, perhaps by language.
It basically is saying that if you have more money then you have more “votes”.
That’s simply true. It doesn’t do anyone any good to disregard the facts.
Or to put it in another way: If you have more money you matter more.
That abstraction doesn’t help much. And first of all, it’s more accurate to derive the statement “If you have more money then you have more influence”.
It’s still a shitty status quo, but it is what it is. The worse thing you can do is tell people not to boycott shit products on the basis of rejecting reality. It’d be like telling people not to vote in elections because their vote is a drop in the ocean.
Some people vote for democrats, then they cancel their own vote by getting their internet service from Spectrum, buying fuel from Chevron for their car, shipping their packages using FedEx, getting their phone service from AT&T, banking at PNC Bank, flying on Boeing planes, shopping on Amazon, doing their web searches on a Microsoft syndicate’s site (e.g. DDG), buying Sony devices… etc. They either have no clue that most of their voting is actually for the republicans, or they think that drop-in-the-ocean vote that comes once in 4 years somehow carries more weight than the daily votes they cast with reckless disregard.
Greg Abbott’s war chest is mostly fed by oil companies. If you buy fuel for a car, you help Greg Abbott and other republicans. And if you buy from Chevron, you give the greatest support to republicans (Chevron is an ALEC member).
You might let her know that she can borrow DVDs from the public library at no cost. Another little-known gratis option is freesat and terrestrial broadcast. I recently started using MythTV as a PVR to record broadcast TV and was pleasantly surprised to find no commercial interruptions (but if there are commercials in her region, MythTV can cut them out).
I didn’t see the OP’s pic but these groups generally work against enshitification of the world:
Notice that none of those communities are on Cloudflared instances (thus also avoid propagating the enshitified portion of the fedi).
Ending capitalism is not the /only/ way. Within a capitalistic system, you can boycott shit. Most consumers are pushovers but it doesn’t have to be that way. I’m boycotting hundreds of shitty companies. Off the top of my head:
Those are all shitty companies that significantly worsen the world. Giving money or data to any of them contributes to enshitification of the world.
Of course it’s an option to stop supporting assholes. Become ethical. Be the change you want to see.
I appreciate the tip. The shank was ½ a bicycle axle bolt with non-standard threading. I could not have switched to a standard bolt because the nuts that interface to ball bearings needed to be on the bolt.
Good to hear your anchors held up over 10 years. Someone else just mentioned they’ve not bee so lucky: https://lemmy.dbzer0.com/comment/5372639 I suppose it’s important that they be used in a dry climate.
That’s good to know. I would hope a metal anchor to reshape when temp causes expansion. It’s a shame to hear it’s the brick that’s forced to expand. In my case it’s a solid metal rod, so it sounds like the metal is guaranteed to split the brick in a temp change.
It sounds like I have to pull out the shank, bore the hole to 10mm, and either use chemical anchor or fasten it using a sheet metal w/2 nuts.
Is this a friction anchor?
https://lemmy.dbzer0.com/pictrs/image/f504ebc8-a015-4b7a-907d-85eabdfc260a.webp
I just learned these exist from the other thread. Though I doubt it would have helped in my case. At this point I’ll just have to check it over the seasons and see if temp changes have caused any issues.
I was mainly asking for future reference whether I should repeat what I did or not. I suppose it’s rare that a smooth rod needs to be installed on brick.
EDIT: looks like the link died due to the comment containing that image being deleted. Sorry about that.
Both… functional art.
The original problem is that there was a water shut-off valve for the whole floor in the shower. Very ugly to have a valve in the corner on the floor and somewhat in the path of the water if someone were to point the showerhead slightly outside the pan. The valve handle was rusting. It was embedded in a solid block of concrete with the handle sticking out. The valve started to fail (did not completely shut off the water). And it was the kind of valve where the whole valve needed to be replaced. Terrible work by the builders. I had to demolish the concrete to reach the valve.
So I replaced the valve with the kind of valve that has a replaceable cartridge. But I also refused to embed it in concrete again. I will build a removable sealed box around it. But the box could not be both waterproof and also easily removable on the fly whenever the valve needs to be accessed. So I put a hole in the wall (shower to bedroom). Then I attached a 90° gearbox drill accessory and a shaft to that goes through the wall. On the bedroom side, I could have just put a handle. But I found a wood helm to a ship (miniaturized). I thought that would be the perfect steampunkish valve handle. But it did not clear the wall (in a corner). So i got carried away and put a bicycle sprocket on the shaft, and mounted the helm to another sprocket, which i attached to the wall higher up. And wrapped a chain between them.
I could not pull it out with my hands after tapping it in. But to be clear, there’s only a sheer force to deal with, and it’s light.
I cut a bicycle axle bolt in half, and embedded it in the brick so there is a bicycle sprocket on the wall. Then a chain wraps another sprocket, which turns a shaft that goes all the way though the wall to the other side, where it connects to a right-angle gearbox, which attaches to a water valve. It’s lightweight overall… just the weight of a sprocket, chain, and a small decorative wood thing out of wood to serve as a handle.
This might come a bit too late but why didn’t you just get threaded rod and use one of these instead?
I did not know anchors like that existed for machine bolts. That’s good to know! However, it would not have helped in this situation. The bicycle axle has non-standard threading (~9mm bolt with a thread pitch that’s 2 steps away from the norm). Since it had a special nut that interfaced to ball bearings, I could not bring in a standard bolt or threaded rod. And the threaded portion of the axle was short enough that no threads could have gone into the wall. I could have added threads to the bare portion, but my die set skips the ø=9mm size.
I was asking more for future reference – whether or not I should ever repeat this. And I think you answered that. Even if I get lucky in the future on getting a perfect fit at that moment, temp changes could blow it. I guess I’ll assume anchors (chemical and mechanical) are designed to handle the temp changes.
Old red brick, which is solid. It’s light duty, and unusual. I cut a bicycle axle bolt in half, and embedded it in the brick so there is a bicycle sprocket on the wall. Then a chain runs to another sprocket, which turns a shaft that goes all the way though the wall to the other side, where it connects to a right-angle gearbox, which attaches to a water valve. But it’s lightweight overall… just the weight of a sprocket, chain, and a small decorative wood thing out of wood to serve as a handle. I suppose you’re sorry you asked at this point.
product 1:
product 2:
product 3:
Going from memory I rotated between the products and I think I poured in about ⅓ of the clog clearing doses on the first two every few days… because I was a cheap bastard and just wanted to constantly have the enzymes in there. But yeah, probably a mistake. I think I tried a 300ml dose of product 2 just once. But I probably should have tried a full dose more often.
Right, but these were specifically for cleaning drains. One of them was kitchen drain specific, and the other two were for drains in general. But indeed it’s possible that the clog was not even organic… perhaps calcium deposits from hard water.
I wonder if pouring a whole bottle of enzymes would have worked. When pouring just 50—100ml or so, it would spread out on the bottom of the pipe and only touch the bottom part of the clog. But if a whole liter rushes through at once then it would cover the whole clog. But it’d be a pricey test.
I documented a drain horror story here, the fiasco of which involved 3 different enzyme-based drain cleaners. They seem to have a dual purpose: use a small amount every 1 or 2 weeks as a maintenance task, or pour down a large amount to work on a clog. I had a very slow drain and the enzymes made no apparent difference. But I know in general enzyme cleaners are quite good. It’s amazing how well they work on the oven. I had a general purpose enzyme based cleaner that worked great for things like food spills that dried on a wall.
I guess proteins is a little over my head. I just saw on the label a bunch of pac-mans gobbling up stuff. I understood that… and hoped I could multiply them. So IIUC, I just have to keep buying them and not reuse them much? Do they degrade in the original bottle just the same as if they’re in dirty water?
🎉 Great news! Glad we can access past threads.
This episode has made it clear Lemmy software needs to improve in several ways to be resiliant to the problem. The possible #LemmyBug/enhancements:
① the fix was apparently not just flipping a switch— it required hacking the db, correct? Shouldn’t admins have a simple undelete button?
② what if a rogue admin had deleted the community, and perhaps even destroyed the db? In principle it should be possible to rebuild the community on a different node using data from all nodes that have data. Sometimes a whole node goes down. The plug gets pulled when funds run out. We are hosed when that happens.
③ each user’s subscriptions panel should not simply quietly cease to list the deleted community. The community name should remain and have indicators to signal issues (e.g. 💀, ⚠).
④ msgs users write are stored in their profile & responses are stored in their inbox. But this is poor organization on its own. It only serves to quickly see new msgs/reactions, but users are overly dependent on the server’s representation of the community to show threads in a coherent way. Clients should have that capability too. I should be able to click “context” on any msg and the client should be able to show me a sequence of msgs regardless of the state of the server host.
Correction-- I was just able to trace back to see how I figured out what the community address was. When I mouse-over “deleted@lemmy.world” on an old post of my own to the deleted community (from my profile), the underlying link is: https://lemmy.dbzer0.com/c/homeimprovement@lemmy.world. So I think it’s only because I am not on lemmy.world myself that this was revealed. I suspect when users are on the same instance where the deletion happened, the original name may not appear. Someone correct me if I’m wrong.
Going forward is not the issue since we have !homeimprovement@disflux.org. The problem is recovering the data that was lost. Where is the backup data?
yeah it was tricky because the community name was overwritten with “deleted@lemmy.world”. I was only able to rediscover what the original community address was by some strange anomaly of like an autocomplete in a search field or something. The existence of the community is scrubbed even on lemmyverse.net.
(edit) And my subscription was quietly removed. What should have happened is the subscription link in my subscription list should have remained as text (not as a hyperlink). It should have gotten a strikethrough with a “💀” next to it. That’s another #LemmyBug for the pile.
The others are right. Trying to stream from a torrent seems wasteful and complex.
But if you must for some strange reason, perhaps it would work to use webtor.io to produce an http-reachable audio file which could be curl/wget-fetched and piped to an audio decoder/player. I doubt you could make webtor fetch pieces linearly from the beginning. You would likely have to wait until the last piece is fetched to start streaming.