The lead singer more than makes up for these misdeeds.

https://consequence.net/2023/08/corpsegrinder-plush-toys-john-hopkins-donation/amp/

Last note, here they are (liquid posts but they’re identical in size to the gas ones) side by side.

The distance from where the lock on to the top of the post looks the same, so we’ll see if this does the trick.

Yeah, we’ll see if that does the trick. Thanks again!

For what it’s worth, here’s what the old post looked like.

I put the new post on and the beer immediately went up the line out. I don’t think there was a clog at all. Going to leave it for a couple days to see if it makes the difference.

Yeah, I was worried about contamination, too. I’ll give your method a try. Thanks for all the advice!

Yeah, not removing the dip tube entirely?

Also, I would assume with a slow leak that I would find myself running out of CO2 pretty quickly, right?

Ok, very good to know. No dry-hopping in the keg and I transferred it to a secondary and then the keg, which removed the majority of the sediment (though it is a hazy IPA).

I’m interested to see if the dip tube is clogged as well, though.

I was thinking the same. It’s a hazy IPA and I had a floating dip tube on there which fell off after kegging and carbing, so I put the regular dip tube in.

I’m wondering if there’s not even enough carbonation to force the beer up through the dip tube but I will see.

Ok, good to know. Thank you.

The beer is at 38F and I have this problem with my other keg that has the same posts. No pressure leaks at all and pre-carbonated, store-bought sixtels pour fine.

Forgot to mention but there’s almost no pour pressure, as well, despite the CO2 being near 15 psi, lines being open and there being the sound of air escaping when I burp the keg.

It’s so interesting, the poppets don’t come out like normal ones with the springs (though I could probably force them out). I just bought new ones, entirely, so we’ll see if those do the trick.

I have replaced the pressure regulator, checked the lines and the attachments for leaks. I still get some pressure in the keg but the beer is severely under-carbonated. This has happened on numerous beers.

I have tried setting to the correct carb pressure and leaving it for 2 weeks, force carbing via the shaking method and the 3-2-1 method where you set the carbonation at triple, drop it to double and then to serving carbonation over three days and I’ve had these issues with all of them.

I don’t quickly run out of CO2 (which I figure I would if there was a leak and this happens on both of my kegs (which both have these types of posts).

My next step if the posts don’t fix it will to be trying a diffusion stone but I feel like I shouldn’t have to.