Got an anycubic resin printer and I’m using their high speed resin (because it was bundled for free), and i tried to send a file using the high speed setting.

After the print it was seemed to be ok, then after i left in a bath of ethanol (IPA can’t be found in stores in my country) i got all those holes.

What’s the problem?

A slicer problem? The ethanol bath? The high speed resin that’s not good?

  • Moonrise2473@lemmy.mlOPEnglish
    21·
    7 months ago

    the slicer said the model needed a repair (which it did), but then it also does this with other stuff. Later I try with a profile with more exposure time

    • nikscha@feddit.deEnglish
      2·
      7 months ago

      I see, but that just makes me want to blame the model even more.

      What can happen if you repair a bad model is that intersecting faces are merged in a way that leads to voids on the inside of your model. If that’s the case it’s really hard to fix for somebody who doesn’t have experience with pointcloud based 3d modeling.

      Please print something that you know is “good”, like the official 3d benchy. I’m almost certain it won’t have the holes that you’re experiencing on your part.

      Edit: do you have a link to the moddel? Then I can confirm for you whether the problem is with the mesh or not.

      • Moonrise2473@lemmy.mlOPEnglish
        2·
        7 months ago

        It was the resin. Once I bought a resin from another brand, it printed perfectly

        It really puzzles me why they would bundle 2 kg of low quality “high speed” resin that isn’t even able to correctly print the test files…

        • nikscha@feddit.deEnglish
          2·
          7 months ago

          Wow okay, definitely unexpected, but I’m glad you figured it out!

          Maybe the reseller just wanted to get rid of bad stock?

          • Moonrise2473@lemmy.mlOPEnglish
            1·
            7 months ago

            I noticed that that “high speed resin” was sold out even if they were still bundling it with new printers

            Then I realized that the profile for that resin in their own official slicer had half the vertical resolution and half the exposure time. It’s something broken that they created just for allowing the marketing to say “the fastest printer on the market, full prints in 2 hours instead of 8”. Even the demo file that was given with the resin had layer delamination when printed, and that’s the best use case, an empty cylinder that needs no support and has a constant wall thickness all around