I’m not at my house and don’t care when it finishes
If I’m at home and won’t hear the sound for some reason, I’ll just set an alarm on my phone. My washing machine tells me how long it’ll take, so there’s no guesswork here.
My washing machine tells me how long it’ll take, so there’s no guesswork here.
Washing machines exist that are smarter than just running a fixed program. They adjust the program, and thus duration, based om how dirty the clothes are. The same goes for dryers that look at the actual humidity of the clothes to determine if they’re finished.
Sure, and if I’m off by a few minutes, that’s totally fine. I honestly don’t need to know the moment my clothes are done, it can wait 20-30 minutes usually. In general, a laundry run takes an hour, plus whatever soak time I choose.
So I really don’t need any network access. I guess it’s fine if others want it, but I see it as a liability. If it connects to a network, that’s a security vulnerability (don’t want a laundry DOS) and another thing to break. Ideally, every model could optionally ship without it.
Not trying to defend stupid internet connectivity but my washing machine is in the basement in a shared laundry room while I live on the second floor of the apartment building. No way I’ll hear it beep so a notification would be very useful actually. This is a very common situation in Europe where a lot of people live in rental apartments.
The problem is rather that there needs to be WiFi access in the laundry room.
Is this washing machine yours? Or is it owned by the landlord? If it’s the landlord’s, that’s a different problem entirely, since now you need multiple people to have separate configurations on the same device to get notifications, but only when their particular load is finished.
I can absolutely see a reason to have “smart” laundromats for things like error codes, abandoned loads, usage statistics, maintenance history, full coin reservoir, etc. That’s the type of problem a shared laundry room would have as well, and it would be fairly easy to add a “tap to notify” feature where you scan a QR code or tap with NFC to get remote access to it.
But for a typical home situation where the laundry machine is the apartment or house, I really don’t see a point, and it’s just a liability.
Its enough for me too. But not everyone has the same use case and environment. I definitely see why someone would want this.
What I disagree with is that it needs to communicate to the internet to do this. It adds delay and potential for outage if your internet is out. But they do this so they can force you to get their app and milk you for extra data to sell. Internet capable smart devices are to harvest data not grant features. Features could be done better by ZigBee and a hub, but that doesnt grant the device a way to phone home
Most washing machines have sensors and do not dry based on a timer. The program time is just a rough estimate, if clothes are still wet or soap bubbles are still present it will do extra rinses or spins.
You could then just set the timer to 2:15h. Still much easier than setting up “smart” tech. It’s like when a buddy of mine spent much money and put quite a bit of work into achieving that his smart light bulb lights up when he’s nearing the apartment door whereas I just screw in a bulb with an integrated movement sensor that achieves exactly the same thing without pairing, sending out gigabytes of data from spying on me, and costing loads of money.
That’s really on a person by person basis. I’m a software engineer, and have already automated a lot of aspects of my life, so adding another device and a new automation took me like 10 minutes to setup.
Setting a timer is more of a hassle than having my washing machine notify me when it’s done - however is most convenient for me. Due to the layout of my home, I am unable to hear the washing machine directly. And setting a timer on my phone sounds like a pain in the ass. And sometimes my wife or kids started a load and I don’t know when they did that, but I need to do some laundry myself, so I need to know if the washer is free but I don’t want to go all the way to the basement to find out.
Luckily, my washer connects to my Wi-Fi and, unfortunately, to the Internet. I very much like that it will notify me on my smart devices around the house and on my phone. It’s actually a great feature. Similarly, I can see my next oven notifying me when it’s preheated. Similar reasons - might be doing laundry or out of earshot when it’s ready to cook.
The problem here isn’t the feature itself. It’s undeniably useful. The issue is that LG’s programmers somehow wrote code that resulted in a tremendous amount of web traffic considering the extremely limited data that could possibly be collected by a washing machine. Think about every tiny thing you did today and write it all down in great detail. You could probably write a short novel if you really tried. And all that can be written to a file less than 1MB in size. The washing machine did not, could not collect that amount of private information about you without also sending audio and/or video. And I’m going to go ahead and assume it has neither microphones or cameras.
So, in the end, this is pretty clearly a programming error. My guess: The washing machine sent a json file containing:
The status of the washer (basic functionality)
the ssid’s and signal strengths of every nearby WiFi and Bluetooth signal (this is personal data they’d sell - which is gross)
Mac address, rtt, ip address, and dns address of every device on the LAN (this is more personal data they’d sell - which is still gross)
*Basic hardware health data including counters for how many cycles it has ran in its lifetime, how long it’s been running, total revolutions of each motor, temperature, and humidity readings (more basic functionality)
And, due to a programming error, it sent this exact same data every second, uncompressed, all day, every day, until the stupid thing gets updated with a firmware patch.
My point is, that’s simply not useful data to collect at that sort of frequency. It’s true - LG wants that data , but it absolutely does not want that data sent to their servers every millisecond of every day. They want it probably once per hour. Maybe even once every 5 minutes. LG doesn’t want 4GB(!) of the exact same data. Collecting and storing data costs real money and infrastructure.
TLDRB I’m going to guess that someone screwed up on the coding side and that’s how you get such egregious amounts of network traffic from a washing machine.
But the one I own does a great job of notifying me and doesn’t show the same traffic patterns. So I still think those and features are useful. Eventually you’ll probably be glad to have them in your appliances too. There’s a ton of use cases for it and it’s quickly becoming standard since the technology is incredibly cheap to produce.
Mine plays a loud jingle when it’s done, which seems to be enough for me.
Yup. There are two situations here:
If I’m at home and won’t hear the sound for some reason, I’ll just set an alarm on my phone. My washing machine tells me how long it’ll take, so there’s no guesswork here.
Washing machines exist that are smarter than just running a fixed program. They adjust the program, and thus duration, based om how dirty the clothes are. The same goes for dryers that look at the actual humidity of the clothes to determine if they’re finished.
Sure, and if I’m off by a few minutes, that’s totally fine. I honestly don’t need to know the moment my clothes are done, it can wait 20-30 minutes usually. In general, a laundry run takes an hour, plus whatever soak time I choose.
So I really don’t need any network access. I guess it’s fine if others want it, but I see it as a liability. If it connects to a network, that’s a security vulnerability (don’t want a laundry DOS) and another thing to break. Ideally, every model could optionally ship without it.
Hahaha, but why?
I’ve used the shortest cycle, on cold, for 30+ years, with less than half the detergent “recommended”. Clothes are always clean.
And my clothes get dirty. Mechanic dirty (oils are tough). Welding. Tree sap from cutting down/splitting.
Front loader?
Not trying to defend stupid internet connectivity but my washing machine is in the basement in a shared laundry room while I live on the second floor of the apartment building. No way I’ll hear it beep so a notification would be very useful actually. This is a very common situation in Europe where a lot of people live in rental apartments.
The problem is rather that there needs to be WiFi access in the laundry room.
Is this washing machine yours? Or is it owned by the landlord? If it’s the landlord’s, that’s a different problem entirely, since now you need multiple people to have separate configurations on the same device to get notifications, but only when their particular load is finished.
I can absolutely see a reason to have “smart” laundromats for things like error codes, abandoned loads, usage statistics, maintenance history, full coin reservoir, etc. That’s the type of problem a shared laundry room would have as well, and it would be fairly easy to add a “tap to notify” feature where you scan a QR code or tap with NFC to get remote access to it.
But for a typical home situation where the laundry machine is the apartment or house, I really don’t see a point, and it’s just a liability.
It is mine. There is a room with each tenant’ washing machine in the basement and that is a typical situation in Germany.
Huh, I’ve never heard of that before. Interesting.
i have an old one without any of it and i dont even care, ill be there eventually and see its done.
im okay with my clothes waiting for a bit
Its enough for me too. But not everyone has the same use case and environment. I definitely see why someone would want this.
What I disagree with is that it needs to communicate to the internet to do this. It adds delay and potential for outage if your internet is out. But they do this so they can force you to get their app and milk you for extra data to sell. Internet capable smart devices are to harvest data not grant features. Features could be done better by ZigBee and a hub, but that doesnt grant the device a way to phone home
Mine is in my garage, and I can’t hear the jingle from inside the house.
But two power monitoring smart plugs+ home assistant fixed that issue
A timer on your phone would have done the same with less hassle.
Most washing machines have sensors and do not dry based on a timer. The program time is just a rough estimate, if clothes are still wet or soap bubbles are still present it will do extra rinses or spins.
Correct. I often find myself going downstairs to the washing machine after 2 hours because it said 1:30h, and then it still needs another 12 minutes.
You could then just set the timer to 2:15h. Still much easier than setting up “smart” tech. It’s like when a buddy of mine spent much money and put quite a bit of work into achieving that his smart light bulb lights up when he’s nearing the apartment door whereas I just screw in a bulb with an integrated movement sensor that achieves exactly the same thing without pairing, sending out gigabytes of data from spying on me, and costing loads of money.
That’s really on a person by person basis. I’m a software engineer, and have already automated a lot of aspects of my life, so adding another device and a new automation took me like 10 minutes to setup.
Setting a timer is more of a hassle than having my washing machine notify me when it’s done - however is most convenient for me. Due to the layout of my home, I am unable to hear the washing machine directly. And setting a timer on my phone sounds like a pain in the ass. And sometimes my wife or kids started a load and I don’t know when they did that, but I need to do some laundry myself, so I need to know if the washer is free but I don’t want to go all the way to the basement to find out.
Luckily, my washer connects to my Wi-Fi and, unfortunately, to the Internet. I very much like that it will notify me on my smart devices around the house and on my phone. It’s actually a great feature. Similarly, I can see my next oven notifying me when it’s preheated. Similar reasons - might be doing laundry or out of earshot when it’s ready to cook.
The problem here isn’t the feature itself. It’s undeniably useful. The issue is that LG’s programmers somehow wrote code that resulted in a tremendous amount of web traffic considering the extremely limited data that could possibly be collected by a washing machine. Think about every tiny thing you did today and write it all down in great detail. You could probably write a short novel if you really tried. And all that can be written to a file less than 1MB in size. The washing machine did not, could not collect that amount of private information about you without also sending audio and/or video. And I’m going to go ahead and assume it has neither microphones or cameras.
So, in the end, this is pretty clearly a programming error. My guess: The washing machine sent a json file containing:
And, due to a programming error, it sent this exact same data every second, uncompressed, all day, every day, until the stupid thing gets updated with a firmware patch.
My point is, that’s simply not useful data to collect at that sort of frequency. It’s true - LG wants that data , but it absolutely does not want that data sent to their servers every millisecond of every day. They want it probably once per hour. Maybe even once every 5 minutes. LG doesn’t want 4GB(!) of the exact same data. Collecting and storing data costs real money and infrastructure.
TLDRB I’m going to guess that someone screwed up on the coding side and that’s how you get such egregious amounts of network traffic from a washing machine.
But the one I own does a great job of notifying me and doesn’t show the same traffic patterns. So I still think those and features are useful. Eventually you’ll probably be glad to have them in your appliances too. There’s a ton of use cases for it and it’s quickly becoming standard since the technology is incredibly cheap to produce.
Source: a programmer
You underestimate the strength of my ADHD. Automation keeps me from having to rely on ol’ unreliable