Tesla cut the price of some Model 3 and Model Y versions in the U.S. after the company reported third-quarter deliveries that missed market expectations.

The starting price for the Model 3 is listed at $38,990 on Tesla’s website, down from $40,240 previously. The long range Model 3 fell from $47,240 to $45,990. And the Model 3 Performance fell to $50,990 from $53,240.

Tesla’s Model Y Performance sports utility vehicle now starts at $52,490, down from a previous price of $54,490.

Beginning at the end of last year, Tesla began cutting the prices of its cars across the world in a bid to stoke demand amid concerns over slowing consumer spending in markets like the U.S. and China and as competition in the electric vehicle space ramped up.

  • Acters@lemmy.world
    link
    fedilink
    arrow-up
    1
    ·
    9 months ago

    If you take a look at the socket, the ones with three prongs are not recommended but it is possible they were installed with a 4th wire in the cable but the socket is 3 prong. I replaced my 3 prong socket with 4 prong one (the 4th wire is ground, crazy stupid to not use it.) Cheap and 26 amps at 220-240 volts.

    • Dogyote@slrpnk.net
      link
      fedilink
      arrow-up
      1
      ·
      9 months ago

      Obviously you don’t need one, but for those who may benefit: I’ve been using a weird 3 prong to 4 prong plug adapter for several years now without trouble. It has a ground wire that you plug into the ground slot of a nearby outlet, so it’s quite safe.

      • Acters@lemmy.world
        link
        fedilink
        arrow-up
        2
        ·
        9 months ago

        Yes, you can do that, but remember that if there is a critical problem that forces the complete current into the ground wire, rare. the ground wire from a smaller socket is also likely to be smaller gauge wire. You will likely end up with the same problem of not having a ground wire as the donor ground could just burn up. You can reduce the possibility of the donor socket ground wire from burning by not allowing anything else to use the socket/wireloop(if there is more than one socket using the same breaker switch).

        This is not proper electrical code, but there is no reason to stop using these cords as the possibility of catastrophic failure from causing much harm. As usual, I would err on the side of safety and suggest getting a professional to work on it and using the proper socket for the plug.

        • Dogyote@slrpnk.net
          link
          fedilink
          arrow-up
          1
          ·
          9 months ago

          Thanks for the info. That would be a crazy, albeit still possible, situation. I’m going to keep using my plug, mostly because I’m renting. Don’t tell my landlord.