President Biden vowed Tuesday to rebuild Baltimore’s Francis Scott Key Bridge after it collapsed into the water when a cargo ship rammed into it, echoing what some Maryland officials said earlier but adding that he expects the federal government to foot the bill.

“It’s my intention that the federal government will pay for the entire cost of reconstructing that bridge, and I expect the Congress to support my effort,” Biden said in remarks at the White House. “This is going to take some time, but the people of Baltimore can count on us though to stick with them at every step of the way until the port is reopen and the bridge is rebuilt.”

He said he spoke with Maryland Gov. Wes Moore (D) on Tuesday morning, as well as Maryland officials including its congressional delegation and two U.S. senators. Transportation Secretary Pete Buttigieg traveled to the Baltimore site.

  • RubberDuck@lemmy.world
    link
    fedilink
    arrow-up
    3
    arrow-down
    19
    ·
    8 months ago

    Footing the bill… but yes. Then again, maybe with the amount of shipping traffic a tunnel makes more sense.

    • jwhardcastle@lemm.ee
      link
      fedilink
      arrow-up
      49
      arrow-down
      1
      ·
      8 months ago

      We have two nearby tunnels. They’ll be packed now. But hazmat trucks and larger oversized vehicles can’t go through tunnels. There’s also a longer way around the northwest of the city, but that’ll be crowded now too. That’s where everyone lives. The bridge over the river was the interstate trucking corridor from DC to Philly up to New York and Boston.

    • tsonfeir@lemm.ee
      link
      fedilink
      arrow-up
      13
      arrow-down
      4
      ·
      8 months ago

      The problem was the boat. It has done this kind of shit before in 2016.

      • FigMcLargeHuge@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        5
        arrow-down
        10
        ·
        8 months ago

        The problem was the boat.

        … and the bridge. Evidently there’s no safety structure around the support that would have prevented a ship from hitting the bridge.

        • Garbanzo@lemmy.world
          link
          fedilink
          English
          arrow-up
          7
          arrow-down
          2
          ·
          8 months ago

          They thought about installing bumpers but decided it was too expensive. Gotta wonder how the cost compares to replacing the whole fucking bridge.

          • SuckMyWang@lemmy.world
            link
            fedilink
            arrow-up
            15
            ·
            8 months ago

            Remember everything seems obvious in hindsight. I’m sure there’s a significant number of bridges with no bumpers have operated without incident for their lifetimes.

            • Garbanzo@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              8 months ago

              A significant number of bridges that would block a major port if they collapsed? I doubt it.

              • pmmeyourtits
                link
                fedilink
                arrow-up
                5
                ·
                8 months ago

                Pretty sure the HRBT down in Hampton roads could cause such a blockage. We live in a capitalistic society, why spend a dollar to protect for a risk that could only happen once every couple hundred thousand ships tends to be the usual thought process unfortunately.

                • Sconrad122@lemmy.world
                  link
                  fedilink
                  arrow-up
                  1
                  ·
                  8 months ago

                  That’s actually exactly why it (and the MMBT and the CBBT) is a bridge tunnel, so that a failure cannot block the port, military base, and shipyards

                  • pmmeyourtits
                    link
                    fedilink
                    arrow-up
                    2
                    ·
                    8 months ago

                    I always figured parts of it collapsing would still block access due to large debris being in the way

          • Billiam@lemmy.world
            link
            fedilink
            arrow-up
            18
            arrow-down
            4
            ·
            8 months ago

            …this is a joke, right? I don’t know anything about bridge engineering or shipping, but what kind of bumper could stop a couple-million-pound ship, even if it was unpowered?

            • HobbitFoot @thelemmy.club
              link
              fedilink
              English
              arrow-up
              8
              ·
              8 months ago

              Probably a large fender system designed to get the ship to slow down by breaking apart to absorb the energy.

              • Natanael@slrpnk.net
                link
                fedilink
                arrow-up
                1
                arrow-down
                3
                ·
                8 months ago

                Do you understand HOW BIG it needs to be and how deep the anchoring need to be to do that? It would be more expensive than building the bridge to not have single points of failure

                • HobbitFoot @thelemmy.club
                  link
                  fedilink
                  English
                  arrow-up
                  1
                  ·
                  8 months ago

                  It will be a very big system, but it will be cheaper than building double the piers as you described.

                  And it is still common today to design bridges with single points of failure today. You just increase the factor of safety for it.

                  • Natanael@slrpnk.net
                    link
                    fedilink
                    arrow-up
                    1
                    ·
                    8 months ago

                    There are methods that doesn’t just involve double the piers, and also 5-10x the material is not likely cheaper at all

                • SuperIce@lemmy.world
                  link
                  fedilink
                  English
                  arrow-up
                  2
                  arrow-down
                  1
                  ·
                  8 months ago

                  Every bridge in the SF Bay Area has fenders and the Bay Bridge had a container ship hit the fenders. The bridge was unaffected but the ship had a hole torn in it which led to a huge oil spill (Cosco-Busan oil spill). Repairing the fender itself only took 1 month and $1.5 million. IMO any bridge that ships pass under it needs appropriately sized fenders for those ships.

                • AA5B@lemmy.world
                  link
                  fedilink
                  arrow-up
                  1
                  arrow-down
                  1
                  ·
                  8 months ago

                  Presumably it would mostly redirect any ship, rather than try to just stop it. Or if it’s possibly to build shallows around it, you can use the weight of the ship against it

            • SuperIce@lemmy.world
              link
              fedilink
              English
              arrow-up
              6
              ·
              8 months ago

              The fenders on the SF Bay Bridge have successfully prevented damage to the bridge twice so far. Every bridge in the SF Bay Area has fenders to prevent exactly what happened in Baltimore. They work.

        • Natanael@slrpnk.net
          link
          fedilink
          arrow-up
          3
          arrow-down
          1
          ·
          8 months ago

          It was a 70’s bridge built to take collisions from 70’s boats of 1/3 the weight.